Fieldpiece Vane Anemometer Accessory Head w/ Temperature AAV3
The Fieldpiece Vane Anemometer Accessory Head measures air velocity from 60
to 5900 ft/min
The Fieldpiece Anemometer Accessory Head with Temperature measures air velocity
and temperature of the moving air. You can estimate CFM by multiplying the average
air velocity times the size of the opening expressed in square feet. The easiest
way to get the average air velocity is to use the data logger (DL2). Take nine
readings (in 3 by 3 pattern) over the grill and the data logger will average
the readings. The Electronic Handle (EHDL1) is required to work with all digital
multimeters with mV ranges.
Features:
Using the Fieldpiece Head Adapter Handle (AHDL1) you can display parameters
directly on digital multimeters set on mVDC scale
Temperature Measurement Range: -4ºF to 140ºF
Works with the Fieldpiece stick meters (HS35), data logger (DL2) and electronic
handle (EHDL1)
Ball bearing moving vane
Auto-off to save battery life
Click
Here For Specification
Spec Summary
|
Conversion
Rate:
|
50 to 2000 microns of
mercury |
|
Resolution
(steps):
|
1 micron of mercury |
|
Pump down
indication:
|
output of head goes
from over 3VDC at atmosphere
to 2VDC at 2000 microns |
|
Fitting:
|
1/4" flared brass fitting
(male) |
|
Accuracy
(75ºF):
|
±10%, 200 to 700 microns
of mercury; ±25% <200 and >700 microns |
|
Battery:
|
9V alkaline
|
Note: The Fieldpiece Vane Anemometer Accessory Head is required to be
used with the Electronic Handle (EHDL1).
