Fieldpiece Infrared Thermometer Accessory Head ATIR3
Fieldpiece Infrared Thermometer Accessory Head measures temperature by collecting
infrared energy emitted by target and converting it to a mVDC signal for direct
current reading on any meter with mV ranges. Non-contact infrared temperature
measurement works best if you cannot touch the test point or if you are looking
fot the hottest or coldest area. IR temperature readings can vary with angle,
and how reflective the surface is.
The Fieldpiece Infrared Thermometer Accessory Head is required to be used with
the Electronic Handle (EHDL1).
Features:
8:1 Distance to spot ratio
Non-contact (Infrared) surface temperature head with laser sight
Select ºF or ºC
Works with the Fieldpiece stick meter HS35), data logger (DL2), and the electronic
handle (EHDL1)
Rugged mechanical design
Click
Here For Specification
Spec Summary
|
Operating ambient temp:
|
32ºF to 122ºF at <75%RH |
|
Temperature measurement range:
|
0ºF to 752ºF |
|
Accuracy:
|
Whichever is greater. At 73ºF ± 10ºF at
<90%RH
±2.0%rdg or 4ºF, 32ºF to 160ºF
±3.0%rdg or 5.5ºF, 0ºF to 31ºF,
161ºF to 752ºF. |
