Fieldpiece Digital Stick Meter HS33

All of Fieldpiece's accessory heads work with the Fieldpiece Stick Meter. With the appropriate accessory head, this meter can measure the following parameters: AC amps, RH%, wet bulb temperature, air temperature, dew point, carbon monoxide, dual temperature, non contact (IR) temperature, air velocity, gas pressure, static pressure, vacuum, milliamps, microamps, and carbon dioxide. Accessory heads can also be connected to the meter using the removable-tip test leads for “remote” testing.

Features:
Removable probe tips for connection to accessory heads
Attach detachable probe tip directly into jack for easy and safe voltage testing
Silicone wire test leads remain flexible in cold weather, withstand caustic chemicals, and work well in temperatures that will melt vinyl leads
Leads conveniently wrap around meter
Rugged rubberized case with built-in magnetic hanger
300AAC clamp head
Deluxe silicone rubber test leads with storage on the back
Alligator clips
K-type thermocouple

Click Here For Specification

Spec Summary:

Auto power off:	30 minutes
Operating environment:	32 to 122°F at <70% R.H.
Storage temperature:	-4 to 140°F, 0 to 80% R.H. with battery removed
Power:	Single standard 9V battery, NEDA 1604, JIS 006P, IEC 6F22
Battery life:	300 hours typical with alkaline
Accessories:	One pair test leads, one pair alligator clips, k-type thermocouple, 9V battery (installed)
Safety:	UL, CE, Cat III 600V, UL3111, IEC1010-1
Temperature range:	-30 to 1000°F
DC Volts ranges:	400mV, 4000mV, 40V, 400V, 600V
AC Volts (50-500Hz) ranges:	400mV, 4V, 40V, 400V, 600V
DC Current ranges:	400µ, 4000µ
Resistance ranges:	400ohm, 4kohm, 40kohm 400kohm, 4Mohm, 40Mohm
Capacitance range:	400µF
Frequency ranges:	4k, 40k, 400k, 4M, 40MHz