WHITER01

White-Rodgers 1F97-1277 Programmable 1 Heat/1 Cool Thermostat - 90 SERIES BLUE TOUCHSCREEN thermostat

Residential and Light Commercial – Single Stage Conventional and Single-Stage Heat Pump Applications. 90 Series Blue Touchscreen Thermostats are the Ultimate for Comfort, Convenience and Performance and Visibility

FEATURES:
• Large 12-square-inch touchscreen display – largest in the industry.
• Extra-large touch keys for easy operation.
• Universal Dual-Powered – choice of battery-powered or hardwired with battery back-up.
• Meets ENERGY STAR® specifications.
• Meets California Building Code, Title 24.
• Universal – choice of 7 day, 5/1/1 day programmable or non-programmable (installer selectable).
• Audible feedback.

• 1F97-1277 includes these additional features:
– Remote sensing indoor/outdoor - EITHER an indoor OR outdoor (wired) sensor can be connected to the thermostat to display remote temperature.
– Programmable fan - fan mode can be specified for each program period.
– Circulator fan cycling - special fan mode will cycle fan ON for 10 minutes, OFF for 20 minutes when the thermostat has not called for cooling or heating for the past 60 minutes.
– Automatic daylight savings option - The Real Time Clock will adjust automatically for daylight savings time, including change after March of 2007.
– Patented Cool Savings - the thermostat will make small adjustments to the sensed temperature during periods of high demand to reduce AC system running time and save energy.
– Enhanced security settings - the thermostat offers two levels of keypad lockout which require user-selected code to unlock
– 3 wire zone valve - compatible with 3-wire zoned hydronic systems

TERMINALS: RC, RH, C, W, Y, G, O, B, W/E, L, 6, +, S, -

SPECIFICATIONS
Electrical Rating
Battery Power . . . . . . . . . . mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire . . . . . . . . . . . . . . . . . 20 to 30 VAC
Terminal Load . . . . . . . . . . . . . . . . . . . 1 .5 A per terminal, 2.5 A maximum all terminals combined
Setpoint Range . . . . . . . . . . . . . . . . . 45 to 99°F (7 to 37°C)
Differential (Single Stage) . . . . . . . . . . Heat 0.6°F; Cool 1.2°F
Differential (Multi-Stage) . . . . . . . . . . . Heat 0.6°F; Cool 1.2°F
Differential (Heat Pump) . . . . . . . . . . . Heat 1.2°F; Cool 1.5°F
Operating Ambient . . . . . . . . . . . . . . . 32 to +105°F (0 to +41°C)
Operating Humidity . . . . . . . . . . . . . . . 90% non-condensing max.
Shipping Temperature Range . . . . . . . –4 to 150°F (–20 to 65°C)
Dimensions . . . . . . . . . . . . . . . . . . . 4 9/16”H x 5 13/16”W x 1 3/16”D

WHITER02

With a single 70 Series thermostat, you can economically upgrade to digital accuracy and energy savings... without any decorating touch-ups. It's new low-profile design covers the footprint of the four most common mechanical thermostats used today. So There's no wall re-painting and no wallplates required. And it's battery powered, making it easy to install and compatible with most heating/cooling systems. The 70 Series is perfect for you if you want a quick and easy digital upgrade.

Product Specifications:
Stages 1 H / 1 C
Power Battery
Program 5 + 2
Changeover Manual
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. No
Special Features

Click Here For Specifications

Click Here For Installation Guide

Accessories:
Wallplate F61-2550
Wallplate with Junction Box Adapter F61-2510

WHITER05

The industry’s first truly universal thermostat. It will work with any Heating and Air Conditioning systems that require 24 volt control. It has 7 day or 5-1-1 programming and can be hardwired or battery operated. This unit also has auto changeover, which makes it the most affordable auto changeover offered by White Rodgers.

White-Rodgers 1F85-277 Programmable Thermostat
Features:
Available Terminals- R,C,E/W1,W2,G,Y1,Y2,O,B,L
Hardwired and or Battery Powered.
Choice of 7 day, 5/1/1 programmable or non-programmable.
Four time and four temperature settings per program (heat & cool).
Energy Star rated with energy savings up to 33%.
Pre-programmed simplifies initial programming.
NEW- 40% Larger LCD with improved contrast for easier reading.
NEW - Lighted display for easier low-light viewing.
NEW - Optional minimum and maximum temperature settings.
Permanent program retention during power loss, no batteries needed.
Indefinite setpoint hold or programmable timed hold up to eight hours.
Air filter change indicator.
Simple menu to activate features.
Temporary temperature override until next program.
Includes two AA Batteries.
Dimensions are 3.8” x 6.1” x 1.1”.
Display size is 2 ¼” Wide x 1” Tall. Digit Size is ¼” wide x ½” tall.
20-30 VAC
Setpoint 45-90° Degrees F.
Rated differential: .6° to 1.6° F with adjustable anticipation.

Performance:
New — Universal – Single Stage, Multi-Stage or Heat Pump
New — Coded keypad lockout
Selectable Energy Management Recovery
Meets ENERGY STAR® specifications
Meets California Building Code, Title 24
Fast (FA) or slow (SL) heating cycle anticipation
Compressor lockout protection (optional)
Electric heat option

Standard Systems:
Multi-Stage—(2- stage heat, 2- stage cool)
Heat Pump—(2- stage heat, 2- stage cool)
Single Stage gas, oil, electric

Product Specifications:
Stages 2 H / 2 C
Power Hardwired OR Battery
Program 7
Changeover Auto
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. Yes
Special Features Keypad Lockout, Adj. temp. limits, Multi-stage or heat pump

Click Here For Specifications

Click Here For Installation Guide

LUXPRO02

Battery powered, low voltage electronic setback heating and cooling thermostat with sealed relay contacts. Pre-programmed with four adjustable heating and cooling periods for weekdays. Preprogrammed with four adjustable heating programs and four adjustable cooling programs for weekends.

PSPH521L Programmable Heat Pump Thermostat
Features:
•Lighted Display
•2 heat / 1 cool heat pump
•Energy Star compliant
•Separate programs for weekdays and weekends
•Preprogrammed - up to 4 programs per day
•Separate programs for heating and cooling
•Either system powered with battery backup or battery powered
•Easily reprogrammed with LUX Programming Dial
•Large Liquid crystal display
•5 minute air conditioning compressor delay
•Temporary and constant temperature override
•Total isolation between system power and thermostat

Click Here For Specifications

Click Here For Installation Guide

LUXPRO03

The PSP711TS can be used with most 24 volt gas, oil or electric heating and air conditioning systems, single stage heat pumps or gas millivolt heating systems. It cannot be used with 3 wire zone valves, 120V systems, or multistage systems.

LuxPro PSP711TS Touch Screen Thermostat Single Stage Heat/Cool, Programmable
Features:
• Extra Large Hybrid Touch Screen Display
• Audible Touch Confirmation
• EL Display Illumination
• Elegant Design
• 7 Day Programming
• Energy Star® Compliant
• 4 Periods Per Day
• Battery Free Memory For All Programs And Settings
• Temporary Temperature Override
• Temperature Hold
• Keyboard Lockout
• F/C Temperature Display
• 12/24 Hr Clock Display
• Adjustable Temperature Differential / Cycle Rate
• Temperature Calibration
• 5/2 minute selectable minimum Run/Off time provides short cycle and compressor protection

Compatible With:
• Low Voltage (24 Volt) Systems
• Single Stage Heat Pumps
• High Efficiency Systems
• Millivolt Systems (Wall Furnace)
• 1 Heat/1 Cool Heating and Cooling Systems

Not Compatible With:
• 2 Stage Heat Pump Systems
• 3 Wire Hot Water Systems
• 120/240 Line Voltage System

Specifications:
Heat/Cool Terminals: RH, RC, O, B, W, Y, G, C.
Electrical Ratings: 1-1/2 AMPS at each terminal, 2 AMPS total 24v AC. System or Battery Powered: 2 "AA" Batteries .
Temperature Control Range: 45°F to 90°F (7° to 32°). Accuracy: ±1°F over a range of 50°F to 95°F.

Environmental Limits:
Moisture and Dust: meets IP20.
Operating Humidity: 20% to 90% non-condensing.
Operating Temperature: +32°F to +95°F (+0°C to +35°C).
Storage Temperature: -4°F to +130°F (-20°C to +54°C).
Electrical Immunity: meets relevant CE specifications.

Product Specifications:
Stages 1 H / 1 C
Power Battery
Program 7
Changeover Manual
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. Yes
Special Features Touch Screen, Touch Screen Lockout Code

Click Here For Specifications

Click Here For Installation Guide

LUXPRO09

Features:
Controls up to 2 Stages of heat and 2 stages of colling plus auxiliary and emergency heat
Auto changeover
Large hybrid dot matrix display
Auxiliary and emergency heat indicators
EL (electro luminescent) backlight
IAQ independently programmable fan
7 day programming
Default ENERGY STAR approved program
4 periods per day
Temporary override
Hold
Vacation hold
Optional smart recovery
ENERGY STAR Compliant
Programmable filter timer with change filter indicator
Energy usage monitor
Fahrenheit or Celsius temperature display
12/24 hour clock
Easy programming with LUX Speed Dial
Advanced copy function for fast easy programming
Nonvolatile memory for all programs and settings
Daylight savings button
Multimode keyboard lockout with user programmable 3 Digit Code
Programmable high and low setting limits
Defeatable audible button response
Menu drivensetup done from the front panel
temperature offset (user calibration)
Dual power capable (system/battery)
Multi-stage adjustable temperature differential/cycle rate
Programmable length minimum run time
Programmable auto-changeover dead-band
Programmable fan delays for heat, cool, in both on and off

Compatible With:
-Most 24v Gas, Oil, Electric Heating and Cooling Systems
-2 wire hydronic systems
-Millivolt systems
-Hydronic air handlers
-Multi-stage heat pumps

Non Compatible With:
-Line voltage systems (without transformer)
-3 wire hydronic systems

PSP722E Detailed Specifications:
Dimensions: 6" wide x 4-3/8" tall x 1-1/4" deep.
Electrical Ratings: 1-1/2 AMPS at each terminal, 2 AMPS total 24v AC. System or battery powered. 2 "AA" batteries included.
Temperature Swing Adjustment: + or - 1o F over a range of 45oF to 90oF
Temperature Control Range: 45oF to 90oF (7oC to 32oC)
Compatibilities: Most 24v Gas, Oil, Electric Heating and Cooling Systems,2 wire hydronic systems, Millivolt systems,Hydronic air handlers,Multi-stage heat pumps
Terminals: RH, RC, O, B, W1, Y1, Y2, G, E, C.

Product Specifications:
Stages 2 H / 2 C
Power Battery or Hardwire
Program 7
Changeover Auto
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. Yes

Click Here For Specifications

Click Here For Installation Guide