WHITER09

With a single 70 Series thermostat, you can economically upgrade to digital accuracy and energy savings... without any decorating touch-ups. It's new low-profile design covers the footprint of the four most common mechanical thermostats used today. So There's no wall re-painting and no wallplates required. And it's battery powered, making it easy to install and compatible with most heating/cooling systems. The 70 Series is perfect for you if you want a quick and easy digital upgrade.

White-Rodgers 1F79-111 Non-Programmable Thermostat
Features:
• Large LCD display with backlight.
• Permanent program retention during power loss.
• Selectable Celsius or Fahrenheit temperature display.
• Selectable Energy Management Recovery (1F72-151).
• Classic White color.

Specifications:
Electrical Rating . . . . . . . . . . . . . . . . . . . 20 to 30 VAC, NEC Class II
Terminal Load . . . . . . . . . . . . . . . . . . . . . 1.0 A per terminal,
1.5 A maximum all terminals combined
Setpoint Range . . . . . . . . . . . . . . . . . . . . 45 to 99°F (7 to 37°C)
Anticipation, Heating . . . . . . . . . . . . . . . Adjustable
Anticipation, Cooling . . . . . . . . . . . . . . . Adjustable
Rated Differential, Heat Pump . . . . . . . . Heat & Cool 0.75° or 1.2°F
Operating Ambient . . . . . . . . . . . . . . . . . 32 to +105°F (0 to +43°C)
Operating Humidity . . . . . . . . . . . . . . . . 90% non-condensing max.
Shipping Temperature Range . . . . . . . . –4 to 149°F (–20 to 65°C)
Dimensions . . . . . . . . . . . . . . . . . . . . . . . 33/4”H x 51/8”W x 11/8”D

Product Specifications:
Stages 2 H / 1 C
Power Hardwired
Program None
Changeover Manual
Backlight No
Remote 0 In / 0 Out
Filter Mon. No

Click Here For Specifications

Click Here For Installation Guide

Accessories:
Wallplate F61-2550
Wallplate with Junction Box Adapter F61-2510

LUXPRO05

Battery powered or hardwired digital heat pump thermostat that controls 1 or 2 stages heat and 1 stage cool. Can be mounted horizontally or vertically.

LuxPro PSDH121 Non-Programmable Vertical or Horizontal
Features:
-Electronic Accuracy
-Large, easy-to-read digital display
-EL (electro luminescent) backlight
-Temperature swing adjustment to as close as + or - 1/4o F/C
-System or battey powered
-Low battery indicator
-Auxiliary and emergency heat indicator
-5 or 2 minute compressor delay
-5 or 2 minute minimum "on" time
-Can be mounted horizontally or vertically

Compatible With:
-1 or 2 stage heat / 1 stage cool heat pumps

Non Compatible With:
-Line voltage systems (without transformer)
-3 wire hydronic systems
-Multi-stage gas or oil furnaces

PSDH121 Detailed Specifications:
Dimensions: 4-5/8" wide x 3-1/4" tall x 7/8" deep.
Electrical Ratings: 1-1/2 AMPS at 24v AC. 2 "AA" batteries included.
Temperature Control Range: + or - 1/2° F/C
Temperature Control Range: 45°F to 90°F (7°C to 32°C)
Compatibilities: 1 or 2 stage / 1 stage cool heat pumps. 2 wire hydronic systems and hydornic air handling systems.
Terminals: Solid pin connectors allow usage with both 24V and millivolt equipment.

Product Specifications:
Stages 2 H / 1 C
Power Battery or Hardwire
Program None
Changeover Manual
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. No
Special Features Horizontal or Vertical Mount

Click Here For Specifications

Click Here For Installation Guide

LUXPRO10

Features:
Universal compatibility
Controls up to 2 stages of heat and 2 stages of cooling plus auxiliary and emergency heat
Auto changeover
Large hybrid display
Auxiliary and emergency heat indicators
Electro-luminescent display backlight
IAQ intermittent fan
F/C temperature display
Nonvolatile memory for all settings
Multimode keyboard lockout with user programmable 3 digit code
Programmable high and low setting limits
Defeatable audible button response
Menu driven setup done from the front panel
Temperature offset (user calibration)
Dual power capable (system/batter)
Multi-stage adjustable temperature differential/cycle rate
Programmable length minimum run time
Programmable auto-changeover dead-band
Programmable fan delays for heat, cool, in both on and off

HEAT STAGES
The PSD122E is capable of controlling systems with up to two stages of heat in furnace mode. In heat pump mode, the thermostat can be configured to control up to two stages of compressor driven heat plus auxiliary and emergency heat stages.

COMPATIBLE WITH:
- Most 24v Gas, Oil, Electric Heating and Air Conditioning Systems
- Single and Multi-stage Heat Pumps
- 2 Wire Hydronic Systems
- Hydronic Air Handlers
- Millivolt Systems

NOT COMPATIBLE WITH:
- 3 Wire Hydronic Systems
- Line Voltage Systems (Without Transformer)
- cannot be used with 120 volt heating systems.

Specifications
Heat/Cool Terminals: RH, RC, O, B, W1, W2, Y1, Y2, G, E, C.
Electrical Ratings: 1-1/2 AMPS at each terminal, 2 AMPS total 24v AC. System or Battery Powered: 2 "AA" Batteries Included.
Temperature Control Range: 45°F to 90°F (7° to 32°). Accuracy: ±1°F over a range of 50°F to 95°F.

Environmental Limits:
Moisture and Dust: meets IP20.
Operating Humidity: 20% to 90% non-condensing.
Operating Temperature: +32°F to +95°F (+0°C to +35°C).
Storage Temperature: -4°F to +130°F (-20°C to +54°C).
Electrical Immunity: meets relevant CE specifications.

Product Specifications:
Stages 2 H / 2 C
Power Hardwire or Battery
Program None
Changeover Auto
Backlight Yes
Remote No
Filter Mon. Yes

Click Here For Specifications

Click Here For Installation Guide