LUXPRO03

The PSP711TS can be used with most 24 volt gas, oil or electric heating and air conditioning systems, single stage heat pumps or gas millivolt heating systems. It cannot be used with 3 wire zone valves, 120V systems, or multistage systems.

LuxPro PSP711TS Touch Screen Thermostat Single Stage Heat/Cool, Programmable
Features:
• Extra Large Hybrid Touch Screen Display
• Audible Touch Confirmation
• EL Display Illumination
• Elegant Design
• 7 Day Programming
• Energy Star® Compliant
• 4 Periods Per Day
• Battery Free Memory For All Programs And Settings
• Temporary Temperature Override
• Temperature Hold
• Keyboard Lockout
• F/C Temperature Display
• 12/24 Hr Clock Display
• Adjustable Temperature Differential / Cycle Rate
• Temperature Calibration
• 5/2 minute selectable minimum Run/Off time provides short cycle and compressor protection

Compatible With:
• Low Voltage (24 Volt) Systems
• Single Stage Heat Pumps
• High Efficiency Systems
• Millivolt Systems (Wall Furnace)
• 1 Heat/1 Cool Heating and Cooling Systems

Not Compatible With:
• 2 Stage Heat Pump Systems
• 3 Wire Hot Water Systems
• 120/240 Line Voltage System

Specifications:
Heat/Cool Terminals: RH, RC, O, B, W, Y, G, C.
Electrical Ratings: 1-1/2 AMPS at each terminal, 2 AMPS total 24v AC. System or Battery Powered: 2 "AA" Batteries .
Temperature Control Range: 45°F to 90°F (7° to 32°). Accuracy: ±1°F over a range of 50°F to 95°F.

Environmental Limits:
Moisture and Dust: meets IP20.
Operating Humidity: 20% to 90% non-condensing.
Operating Temperature: +32°F to +95°F (+0°C to +35°C).
Storage Temperature: -4°F to +130°F (-20°C to +54°C).
Electrical Immunity: meets relevant CE specifications.

Product Specifications:
Stages 1 H / 1 C
Power Battery
Program 7
Changeover Manual
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. Yes
Special Features Touch Screen, Touch Screen Lockout Code

Click Here For Specifications

Click Here For Installation Guide

LUXPRO01

The Programmable Thermostat w/backlight offers all that digital thermostats do, plus they can be programmed to automatically adjust your home's temperature based on your schedule and lifestyle. If you're looking for total home comfort and to save as much as 18% on your energy bill then this type of thermostat would be great for you. Battery or common powered, low voltage electronic setback heating and cooling thermostat with sealed relay contacts.

Pre-programmed with four adjustable heating and cooling periods for weekdays. Preprogrammed with four adjustable heating programs and four adjustable cooling programs for weekends.

Compatible with most single stage 24v gas, oil, electric heating and air conditioning systems including single stage heat pumps, 2 wire hydronic systems, Millivolt systems, Hydronic air handlers.
Non Compatible with Multi-stage heat pumps, Multi-stage gas or oil furnaces 3 wire hydronic systems Line voltage systems (without transformer)

PSP511LC- 5 and 2 Programming with Light
Features:
•Energy Star certified
•Separate programs for weekdays and weekends
•Preprogrammed - up to 4 programs per day
•Separate programs for heating and cooling
•Either system powered with battery backup or battery powered
•Separate weekday and weekend programming
•Easily reprogrammed with LUX Programming Dial
•Large Liquid crystal display
•5 or 2 minute air conditioning compressor delay
•Temporary and constant temperature override
•Total isolation between system power and thermostat

Dimensions: 4-1/2" wide x 3-1/4" tall x 1-1/4" deep.
Electrical Ratings- 1-1/2 AMPS at 24v AC. Requires 2 AA batteries (included).
Temperature Differential- + or - 1o factory preset differential adjustable from 1/4oF to 2-1/4oF.
Temperature Control Range- 45°F to 90°F (7°C to 32°C) - Celsius and 12/24 hour time capable.
Compatibilities- 2-5 wire forced air systems, 2 wire hydronic systems, and hydronic air handling systems. Terminals G, Y, W, RH, RC. Solid pin connectors. Allow usage with both 24v and millivolt equipment.
Program Settings- 4 preset programs per day heating and cooling. All may be easily reprogrammed in 10 and 15 minute increments with LUX Programming Dial.
Circuit Protection- Circuit protection is built-in, no isolation relays required.
Compressor Protection- Built-in 5 minute time delay.

Product Specifications:
Stages 1 H / 1 C
Power Battery or Hardwire
Program 5 + 2
Changeover Manual
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. No

Click Here For Specifications

Click Here For Installation Guide

Optional Wall Plate
Decorative wall plate is available for thermostat. 6-1/2"W x 4-3/4"H

LUXPRO09

Features:
Controls up to 2 Stages of heat and 2 stages of colling plus auxiliary and emergency heat
Auto changeover
Large hybrid dot matrix display
Auxiliary and emergency heat indicators
EL (electro luminescent) backlight
IAQ independently programmable fan
7 day programming
Default ENERGY STAR approved program
4 periods per day
Temporary override
Hold
Vacation hold
Optional smart recovery
ENERGY STAR Compliant
Programmable filter timer with change filter indicator
Energy usage monitor
Fahrenheit or Celsius temperature display
12/24 hour clock
Easy programming with LUX Speed Dial
Advanced copy function for fast easy programming
Nonvolatile memory for all programs and settings
Daylight savings button
Multimode keyboard lockout with user programmable 3 Digit Code
Programmable high and low setting limits
Defeatable audible button response
Menu drivensetup done from the front panel
temperature offset (user calibration)
Dual power capable (system/battery)
Multi-stage adjustable temperature differential/cycle rate
Programmable length minimum run time
Programmable auto-changeover dead-band
Programmable fan delays for heat, cool, in both on and off

Compatible With:
-Most 24v Gas, Oil, Electric Heating and Cooling Systems
-2 wire hydronic systems
-Millivolt systems
-Hydronic air handlers
-Multi-stage heat pumps

Non Compatible With:
-Line voltage systems (without transformer)
-3 wire hydronic systems

PSP722E Detailed Specifications:
Dimensions: 6" wide x 4-3/8" tall x 1-1/4" deep.
Electrical Ratings: 1-1/2 AMPS at each terminal, 2 AMPS total 24v AC. System or battery powered. 2 "AA" batteries included.
Temperature Swing Adjustment: + or - 1o F over a range of 45oF to 90oF
Temperature Control Range: 45oF to 90oF (7oC to 32oC)
Compatibilities: Most 24v Gas, Oil, Electric Heating and Cooling Systems,2 wire hydronic systems, Millivolt systems,Hydronic air handlers,Multi-stage heat pumps
Terminals: RH, RC, O, B, W1, Y1, Y2, G, E, C.

Product Specifications:
Stages 2 H / 2 C
Power Battery or Hardwire
Program 7
Changeover Auto
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. Yes

Click Here For Specifications

Click Here For Installation Guide

LUXPRO10

Features:
Universal compatibility
Controls up to 2 stages of heat and 2 stages of cooling plus auxiliary and emergency heat
Auto changeover
Large hybrid display
Auxiliary and emergency heat indicators
Electro-luminescent display backlight
IAQ intermittent fan
F/C temperature display
Nonvolatile memory for all settings
Multimode keyboard lockout with user programmable 3 digit code
Programmable high and low setting limits
Defeatable audible button response
Menu driven setup done from the front panel
Temperature offset (user calibration)
Dual power capable (system/batter)
Multi-stage adjustable temperature differential/cycle rate
Programmable length minimum run time
Programmable auto-changeover dead-band
Programmable fan delays for heat, cool, in both on and off

HEAT STAGES
The PSD122E is capable of controlling systems with up to two stages of heat in furnace mode. In heat pump mode, the thermostat can be configured to control up to two stages of compressor driven heat plus auxiliary and emergency heat stages.

COMPATIBLE WITH:
- Most 24v Gas, Oil, Electric Heating and Air Conditioning Systems
- Single and Multi-stage Heat Pumps
- 2 Wire Hydronic Systems
- Hydronic Air Handlers
- Millivolt Systems

NOT COMPATIBLE WITH:
- 3 Wire Hydronic Systems
- Line Voltage Systems (Without Transformer)
- cannot be used with 120 volt heating systems.

Specifications
Heat/Cool Terminals: RH, RC, O, B, W1, W2, Y1, Y2, G, E, C.
Electrical Ratings: 1-1/2 AMPS at each terminal, 2 AMPS total 24v AC. System or Battery Powered: 2 "AA" Batteries Included.
Temperature Control Range: 45°F to 90°F (7° to 32°). Accuracy: ±1°F over a range of 50°F to 95°F.

Environmental Limits:
Moisture and Dust: meets IP20.
Operating Humidity: 20% to 90% non-condensing.
Operating Temperature: +32°F to +95°F (+0°C to +35°C).
Storage Temperature: -4°F to +130°F (-20°C to +54°C).
Electrical Immunity: meets relevant CE specifications.

Product Specifications:
Stages 2 H / 2 C
Power Hardwire or Battery
Program None
Changeover Auto
Backlight Yes
Remote No
Filter Mon. Yes

Click Here For Specifications

Click Here For Installation Guide

LUXPRO04

Battery powered or hardwired digital heating and cooling thermostat with a large easy-to-read display and with temperature swing adjustment. Thermostat can be mounted horizontally or vertically.

LuxPro PSD111 Non-Programmable Thermostat
Features:
-Electronic Accuracy
-Non-Programmable
-Large, easy-to-read display
-EL (electro luminescent) backlight
-Temperature swing adjustment to as close as + or - 1/4o F/C
-Universal replacement
-Low battery indicator
-5 or 2 minute compressor delay
-5 or 2 minute minimum on time
-Heating and cooling digital thermostat
-Vertical or horizontal style

Compatible With:
-Most 24v Gas, Oil, Electric Heating and Cooling Systems
-2 wire hydronic systems
-Millivolt systems
-Hydronic air handlers
-Single-stage heat pumps

Non Compatible With:
-3 wire hydronic systems
-Multi-stage heat pumps
-Multi-stage gas or oil furnaces
-Line voltage systems (without transformer)

PSD100 Detailed Specifications:
Dimensions: 4-5/8" wide x 3-1/4" tall x 7/8" deep.
Electrical Ratings: 1-1/2 AMPS at 24v AC. 2 "AA" batteries included.
Temperature Control Range: + or - 1/2° F/C.
Temperature Swing Adjustment: 45°F to 90°F (7°C to 32°C).
Compatibilities: 2-5 wire forced air systems. 2 wire zone hydronic systems and hydronic air handling systems.
Terminals: G, Y, W, RH, RC. Solid pin connectors allow usage with both 24V and millivolt equipment.


Product Specifications:
Stages 1 H / 1 C
Power Hardwire or Battery
Program None
Changeover Manual
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. No
Special Features -Vertical or Horizontal Mount

Click Here For Specifications

Click Here For Installation Guide

LUXPRO05

Battery powered or hardwired digital heat pump thermostat that controls 1 or 2 stages heat and 1 stage cool. Can be mounted horizontally or vertically.

LuxPro PSDH121 Non-Programmable Vertical or Horizontal
Features:
-Electronic Accuracy
-Large, easy-to-read digital display
-EL (electro luminescent) backlight
-Temperature swing adjustment to as close as + or - 1/4o F/C
-System or battey powered
-Low battery indicator
-Auxiliary and emergency heat indicator
-5 or 2 minute compressor delay
-5 or 2 minute minimum "on" time
-Can be mounted horizontally or vertically

Compatible With:
-1 or 2 stage heat / 1 stage cool heat pumps

Non Compatible With:
-Line voltage systems (without transformer)
-3 wire hydronic systems
-Multi-stage gas or oil furnaces

PSDH121 Detailed Specifications:
Dimensions: 4-5/8" wide x 3-1/4" tall x 7/8" deep.
Electrical Ratings: 1-1/2 AMPS at 24v AC. 2 "AA" batteries included.
Temperature Control Range: + or - 1/2° F/C
Temperature Control Range: 45°F to 90°F (7°C to 32°C)
Compatibilities: 1 or 2 stage / 1 stage cool heat pumps. 2 wire hydronic systems and hydornic air handling systems.
Terminals: Solid pin connectors allow usage with both 24V and millivolt equipment.

Product Specifications:
Stages 2 H / 1 C
Power Battery or Hardwire
Program None
Changeover Manual
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. No
Special Features Horizontal or Vertical Mount

Click Here For Specifications

Click Here For Installation Guide

LUXPRO07

PSPA722 Temperature control adjustable. 7 Day Programmable Thermostat

PSPA722 Digital Thermostat
Features:
•Auto changeover
•Fully Programmable IAQ Clean Cycle® Intermittent Fan
•Programmable Auto Changeover
•Dead-Band (1°F to 6°F)
•7 Day Programming – 4 Periods Per Day Easy Programming with Lux Speed Dial
•Dual Power – System or Battery Powered with Battery Free Memory Storage
•Programmable Filter Timer with Change Filter Indicator
•Temporary Override is CAT24 Compliant
•Vacation Override
•Adjustable 2 or 5 Minute A/C Compressor Delay
•Energy Usage Monitor
•EL (Electro Luminescent) Back Light Display
•Mode and Fan Slide Switch
•Optional Early Recovery
•Energy Star Compliant
•Batteries Included
•1-Year Warranty
•F/C Selectable
•12/24 Hr Clock
•Temperature Calibration
•Multi-Stage Adjustable Temperature Differential/Cycle Rate (.25 - 2.25)
•Programming Copy Button
•Keyboard Lockout
•Speed Dial® Reprogramming
•High Efficiency Systems
•Contractor Grade
•On-Screen Low Battery Indicator
•Soft Touch Buttons
•Default Energy Star Approved Program
•Separate Temperature for Heating & Cooling
•Hold Constant Temperature Override
•Audible Keypad Entry Response

Click Here For Specifications

Click Here For Installation Guide

LUXPRO08

PSPHA732 Up to 3 Stage Heat/2 Stage Cool
7 DAY PROGRAMMABLE THERMOSTAT with AUTOCHANGEROVER

Features:
•Autochangeover
•Fully Programmable IAQ Clean Cycle® Intermittent Fan
•Programmable Auto Changeover
•Dead-Band (1°F to 6°F)
•7 Day Programming – 4 Periods Per Day
•Easy Programming with Lux Speed Dial
•Dual Power – System or Battery Powered with Battery Free Memory Storage
•Emergency and Auxiliary Heat Indicators
•Programmable Filter Timer with Change Filter Indicator
•Temporary Override is CAT24 Compliant
•Vacation Override
•Adjustable 2 or 5 Minute A/C Compressor Delay
•Energy Usage Monitor
•EL (Electro Luminescent) Back Light Display
•Mode and Fan Slide Switch
•Optional Early Recovery
•Energy Star Compliant
•Batteries Included
•1-Year Warranty
•F/C Selectable
•12/24 Hr Clock
•Temperature Calibration
•Multi-Stage Adjustable Temperature Differential/Cycle Rate (.25 - 2.25)
•Programming Copy Button
•Keyboard Lockout
•Speed Dial® Reprogramming
•High Efficiency Systems
•Contractor Grade
•On-Screen Low Battery Indicator
•Soft Touch Buttons
•Default Energy Star Approved Program
•Separate Temperature for Heating & Cooling
•Hold Constant Temperature Override
•Audible Keypad Entry Response
•1 Minute Optional Residual Fan

Click Here For Installation Guide

LUXPRO02

Battery powered, low voltage electronic setback heating and cooling thermostat with sealed relay contacts. Pre-programmed with four adjustable heating and cooling periods for weekdays. Preprogrammed with four adjustable heating programs and four adjustable cooling programs for weekends.

PSPH521L Programmable Heat Pump Thermostat
Features:
•Lighted Display
•2 heat / 1 cool heat pump
•Energy Star compliant
•Separate programs for weekdays and weekends
•Preprogrammed - up to 4 programs per day
•Separate programs for heating and cooling
•Either system powered with battery backup or battery powered
•Easily reprogrammed with LUX Programming Dial
•Large Liquid crystal display
•5 minute air conditioning compressor delay
•Temporary and constant temperature override
•Total isolation between system power and thermostat

Click Here For Specifications

Click Here For Installation Guide

LUXPRO06

Snap action mechanical heating and cooling thermostat with adjustable heat anticipator.

LuxPro PSM40SA Heat & Cool Thermostat
Features:
•Clean attractive design
•Snap Action Mechanism
•Valued priced
•Adjustable heat anticipator
•Heating and cooling mechanical thermostat
•Contains no Mercury

Compatible With:
-Most 24v Gas, Oil, Electric Heating and Cooling Systems
-2 wire hydronic systems
-Millivolt systems
-Hydronic air handlers
-Single-stage heat pumps

Non Compatible With:
-3 wire hydronic systems
-Multi-stage heat pumps
-120V/240V Systems
-Compressor without time delays

Click Here For Specifications

Click Here For Installation Guide