COMFORTSTAT01

Comfort stat CP1717 Digital Non-Programmable Thermostat With Green Backlight.

Click here for the applications & features page.

ROBERTSHAW31

The 9500 Series is the clear alternative to traditional mechanical thermostats. This modern design provides attractive and consistent temperature control. Reading the temperature is easy and accurate with our large LCD display.

The 9500 features low temperature protection, which will automatically turn on the heat if the indoor temperature goes below 40°F. All models feature an adjustable temperature differential to meet customer specific preferences.

9500- 1 Heat / 1 Cool
• Compatible with all standard 24 VAC heating and cooling systems, including single stage heat pumps
• O & B Terminals
• Automatic Compressor Short Cycle Protection

Click Here For Specification

Click Here For Installation Guide

Product Specifications:
Stages: 1 H / 1 C
Power: Battery
Program: None
Changeover: Manual
Backlight: No
Remote: 0 In / 0 Out
Filter Mon: No
Supports: Gas, Electric, Oil, and Heat Pump

WHITER13

Reliable performance combined with thin-profile subbase mounting plate. Entire unit extends 1 5/8” from wall.

White-Rodgers 1F56W-444 Horizontal, Classic White, Single Stage Thermostat
Features:
Low Voltage Electromechanical Thermostat
Voltage Rating 24 Volts
Type Heat Cool
Switching Fan Auto On
Sub Base Included
Temperature Range 50-90 Degrees Fahrenheit
Height 4 1/2 Inches
Depth 1 5/8 Inches
Width 3 1/4 Inches
Color White
Application Gas
Oil
Electric or Single Stage Heat Pump
Remarks Can be Used with 2 Transformer Systems
Vertical Mount
Product Contains Mercury Refer To Applicable State Regulations for Disposition After Use

Click Here For Specifications

Click Here For Installation Guide

LUXPRO04

Battery powered or hardwired digital heating and cooling thermostat with a large easy-to-read display and with temperature swing adjustment. Thermostat can be mounted horizontally or vertically.

LuxPro PSD111 Non-Programmable Thermostat
Features:
-Electronic Accuracy
-Non-Programmable
-Large, easy-to-read display
-EL (electro luminescent) backlight
-Temperature swing adjustment to as close as + or - 1/4o F/C
-Universal replacement
-Low battery indicator
-5 or 2 minute compressor delay
-5 or 2 minute minimum on time
-Heating and cooling digital thermostat
-Vertical or horizontal style

Compatible With:
-Most 24v Gas, Oil, Electric Heating and Cooling Systems
-2 wire hydronic systems
-Millivolt systems
-Hydronic air handlers
-Single-stage heat pumps

Non Compatible With:
-3 wire hydronic systems
-Multi-stage heat pumps
-Multi-stage gas or oil furnaces
-Line voltage systems (without transformer)

PSD100 Detailed Specifications:
Dimensions: 4-5/8" wide x 3-1/4" tall x 7/8" deep.
Electrical Ratings: 1-1/2 AMPS at 24v AC. 2 "AA" batteries included.
Temperature Control Range: + or - 1/2° F/C.
Temperature Swing Adjustment: 45°F to 90°F (7°C to 32°C).
Compatibilities: 2-5 wire forced air systems. 2 wire zone hydronic systems and hydronic air handling systems.
Terminals: G, Y, W, RH, RC. Solid pin connectors allow usage with both 24V and millivolt equipment.


Product Specifications:
Stages 1 H / 1 C
Power Hardwire or Battery
Program None
Changeover Manual
Backlight Yes
Remote 0 In / 0 Out
Filter Mon. No
Special Features -Vertical or Horizontal Mount

Click Here For Specifications

Click Here For Installation Guide

JB02

Platinum Series pump highlights include:
•*15 Micron Field Tested (Thermistor Gauge Reading)
•24 Month Warranty
•All Metal Construction
•Large Easy To Read Sight Glass
•2 Stage Direct Drive Design
•O-Ring Sealed Easy Open Drain Valve Prevents Unwanted Leaks
•Check Valve Prevents Oil Backflow during Power Failure
•Blank-Off Valve Isolates Pump from System for Detecting Leaks
•Completely Field Repairable
•16 Ounce Oil Capacity for good contaminant absorption and easy oil changes. See JB Vacuum Oil
•Low profile rocker switch helps prevent damage and accidental shut off . O-Ring seal and hand tight design help keep your oil changes quick and clean .
•Four Point Feet offer a wider stance for better stability on uneven surfaces

Specifications:
Part No: DV-42N
1/2 HP Motor: 1/2 HP, 115 volt, 60 HZ, 1725 RPM
Free Air Displacement (LPM): 1.5CFM (421pm)
Intake Ports (Male Flare): 1/4"
Oil Capacity: 30oz. (865cc)
Weight: 29Lbs

*One Micron on a U-Tube Manometer 25,400 Microns = "1"

Click Here For Installation and Parts Manual

AQUAGUARD01

The AG-1100 can be mounted very quickly. Installation does not require a hole in the pan. The AG-1100 switch incorporates a protective cover to keep out insulation and debris that could prevent the float from rising.

Model No: AG-1100
Model Name: Metal Pan Float Switch
Application: Mounts to metal pan


•Plastic switch is pest-resistant
•High-sensitivity switch
•7 foot lead is rustproof and waterproof
•Same switch is used to deploy air bags in U.S. automobiles

Click Here for AG-1100 Installation Instructions

PAN13

Click Here For Specification

FV-11VHL1

CONDPUMP01

Automatic Condensate Removal Pump - VCMA Series 115V
The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCMA Series. Adding features for every installation, with guaranteed serviceability and unmatched reliability, Little Giant Pump Company once again defines state-of-the-art in pump design.

•Fully Automatic
•1/2 gallon leakproof, rustproof, high impact ABS tank
•3 drain holes
•Removable 3/8" barbed check valve
•New generation float arm for enhanced reliability
•Thermal overload protection
•Optional safety switch
•Suitable for High-Efficiency, Gas-Fumace Condensate
•Flame retardant ABS plastic motor & tank cover, volute and impeller
•Stainless steel shaft
•Snap-action switch
•6' power cord with 3-pronged plug
•Includes 20' of 3/8" ID tubing
•Easy installation
•UL & CSA listed

Click Here For Specification

Click Here For Owners

Item Number: 554435
Model Number: VCMA-20ULST
Title: Automatic Condensate Removal Pump - VCMA Series
Horsepower: 1/30
Flow: 80 GPH @ 1' of Head
Cord Length: 6'
Shut Off: 20
Voltage: 115
Hertz: 60
Amps: 1.5
Watts: 93
Weight: 6
Height: 7
Width: 5
Length: 11

Head (ft)	Flow (GPH)	Head (m)	Flow (LPH)
1	80	0.3	302.8
5	70	1.5	265.0
9	55	2.7	208.2
15	24	4.6	94.6

Item Number: 554435 115V Condensate Removal Pump

FIELDPIECE01

Feature-packed for optimum performance, with the Fieldpiece Clamp-On Meter, you'll get the most out of the one meter you need to carry!

Features:
Non-contact Voltage - Loud beeper and bright LED indicate the NCV tab is near AC voltages greater than 24V
Temperature - Thermocouple plugs in directly for accurate readings, even in fast changing environments
Microamps - For flame rectifier diode tests
Capacitance - For motor-run and motor-start capacitors And More
Hi-voltage indicator you can't miss--both LED and beeper turn on to indicate you've touched a potentially dangerous voltage
Continuity indicated by LED and beeper
MAX hold automatically holds reading so you can look at the meter after you've disconnected
Low ohms ranges for motor windings and mid range for thermistors
Amps AC resolution to 0.01A for heat anticipator circuit (20A range). Up to 200AAC with 0.1V resolution (200A range)
DC to 0.01V resolution (20V range)
Auto-power off to extend battery life

Test Lead Solutions:
Probe storage in the back. Just snap them in
Single test lead holder for easy and safe voltage testing
Silicone test leads remain flexible in cold weather, withstand caustic chemicals, and work well in temperatures that will melt vinyl leads
Convenient lead storage. Wrap test leads through clamp to keep the wires out of the way
You can even leave them right there when you test amps

Click Here For Specification

FIELDPIECE03

Fieldpiece Digital Stick Meter HS33

All of Fieldpiece's accessory heads work with the Fieldpiece Stick Meter. With the appropriate accessory head, this meter can measure the following parameters: AC amps, RH%, wet bulb temperature, air temperature, dew point, carbon monoxide, dual temperature, non contact (IR) temperature, air velocity, gas pressure, static pressure, vacuum, milliamps, microamps, and carbon dioxide. Accessory heads can also be connected to the meter using the removable-tip test leads for “remote” testing.

Features:
Removable probe tips for connection to accessory heads
Attach detachable probe tip directly into jack for easy and safe voltage testing
Silicone wire test leads remain flexible in cold weather, withstand caustic chemicals, and work well in temperatures that will melt vinyl leads
Leads conveniently wrap around meter
Rugged rubberized case with built-in magnetic hanger
300AAC clamp head
Deluxe silicone rubber test leads with storage on the back
Alligator clips
K-type thermocouple

Click Here For Specification